Wired Curtain Type PIR Sensor

This product is a small curtain-type passive infrared detector with a beautiful and sleek appearance. It can be installed on the ceiling or wall. It is suitable for safety precautions on balconies, windows, corridors, etc. The circuit has rich functions such as anti-radio frequency interference and automatic temperature compensation. It can respond quickly to human body intrusion and generate an alarm.

Category: Tags: ,

Description

Function Description

1. Connect the 12V DC power supply and the red indicator light will be on. The detector enters the self-test state, The self-test time is about 60 seconds. When the indicator light goes off, it means the detector enters the monitoring state.
2. In the area covered by the detector, test at normal walking speed, red The indicator light is on and the detector enters the alarm state. The light goes out and it enters the monitoring state again.
3. The normally open/normally closed jumper pin is used to set the alarm output state, which can be adjusted according to different alarm hosts. Select different output states, plug in the jumper cap in NC (normally closed state), plug in the jumper. The cap is in NO (normally open state). Factory setting is normally closed.
4. After the detector is powered on, the LED indication function is turned on by default.

Additional information

Working Voltage

DC 12-18V
Working Current

≤20mA
Working Temperature

-10°C-55°C
Detection Range

6m
Detection Angle

15°
Installation Method

Wall-Mounted or Ceiling
Installation Height

2.2m
Relay Output

NC contact volume 28V DC 80mA
Temper

NC contact volume 28V DC 100mA
Size

35*28*79mm

Reviews

There are no reviews yet.

Be the first to review “Wired Curtain Type PIR Sensor”

Your email address will not be published. Required fields are marked *

Related products